TORNOS MULTI-SPINDLE COLLETS

USE OF TORNOS MULTI-SPINDLE COLLETS

Tornos multi-spindle collets are used for workpiece clamping as well as in Tornos multi-spindle machines.

dShaft-Ø
AHead-Ø
LTotal length
KTaper angle
GThread
FShape

 

Articleø d
[mm]		ø A
[mm]		Total length L
[mm]		Taper angle K
[degree]		Thread GForm F max.[mm]
      
TW2023267515M20x13,0 – 14,54,0 – 10,04,0 – 12,0
TW2023267515M20x116,0  

TORNOS MULTI-SPINDLE COLLETS CLAMPING SURFACES

SMOOTH – STANDARD

  • Standard collet

GROOVED

  • With additional grooves

AXIAL & RADIAL GROOVES

  • Higher clamping force compared to the grooved standard collet due to the additional axial grooves

SUPERGRIP

  • Highest clamping force at the same clamping pressure of the machine due to very closely spaced axial grooves

CARBIDE COATING

  • Carbide coating possible for all shapes
  • Roughened surface
  • Higher clamping force
  • Repeated / afterward coating possible

TORNOS MULTI-SPINDLE COLLETS SHAPES

SPECIAL PROFILES

  • Various profiles can be realized by ram EDM or wire EDM
  • Profiles can be adapted individually to the workpiece

SPECIAL CONTOURS

  • Complex contours can be realized by hard milling, hard turning and grinding
  • Already possible with smallest diameters from 0.2 mm

TORNOS MULTI-SPINDLE COLLETS SLOT DESIGNS

S-SLOT

  • High and constant clamping force
  • Clamping with virtually no clamping marks
  • Alternatively usable for profile material (corner clamping)
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Easy to clean after use

L-SLOT

  • High and constant clamping force
  • Clamping with virtually no clamping marks
  • Alternatively usable for profile material (corner clamping)
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Easy to clean after use
  • Ideal for clamping short clamping surfaces

W-SLOT

  • High and constant clamping force
  • Clamping with virtually no clamping marks
  • Alternatively usable for profile material (corner clamping)
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Easy to clean after use

Z-SLOT

  • High and constant clamping force
  • Clamping with virtually no clamping marks
  • Alternatively usable for profile material (corner clamping)
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Easy to clean after use

TORNOS MULTI-SPINDLE COLLETS WEAR REDUCTION

CARBIDE INSERT

  • High wear resistance
  • Prevents pressure marks on the workpiece
  • Higher service life

TORNOS MULTI-SPINDLE ADDITIONAL VERSIONS

UP VERSION

  • High precision

UUP VERSION

  • Highest precision

SEALED

  • Prevents the entry of machining chips
  • The whole slot area can be sealed
  • Resealing possible
  • Not usable with high pressure flushing in the machine