HYDROMAT COLLETS

USE OF HYDROMAT COLLETS

Hydromat collets are used for workpiece clamping as well as in rotary transfer machines such as Eubama, Hydromat and Pfiffner (FFG). Hydromat collets are available with threaded or quick change version. They can also be supplied with a saw burr cut in the clamping area. Suitable for the Hydromat collets, hydromat reducing sleeves, ejector bar, ejector sleeves and stop heads can be manufactured.

dShaft-Ø
AHead-Ø
LTotal length
KTaper angle
GThread
FShape
Articleø d
[mm]		ø A
[mm]		L
[mm]		K
[degree]		GF
min. – max. [mm]		Step bore
       
SHW202026,396,515Ø19,7×1,666
45°/5°		1,0 – 13,52,0 – 9,52,0 – 11,5 
SHW202026,396,515Ø19,7×1,666
45°/5°		13,51 – 20,0PRPRPR
SHW252533,797,615Ø24,7×1,693
45°/5°		3,0 – 17,53,0 – 12,03,0 – 15,0 
SHW252533,797,615Ø24,7×1,693
45°/5°		17,51 – 25,0PRPRPR
SHW25QC2533,797,615Quick change3,0 – 17,53,0 – 12,03,0 – 15,0 
SHW25QC2533,797,615Quick change17,51 – 25,0PRPRPR
SHB32324010615Ø29,7×1,693
45°/5°		3,0 – 23,53,0 – 16,53,0 – 20,0 
SHB32324010615Ø29,7×1,693
45°/5°		23,51 – 28,0PRPRPR
SHB32QC324010615Quick change3,0 – 23,53,0 – 16,53,0 – 20,0 
SHB32QC324010615Quick change23,51 – 28,0PRPRPR
SHB32/45325312215Ø29,7×1,693
45°/5°		3,0 – 23,53,0 – 16,53,0 – 20,0 
SHB32/45325312215Ø29,7×1,693
45°/5°		23,51 – 41,0PRPRPR
SHB45455311515M42x1,53,0 – 36,03,0 – 25,03,0 – 31,0 
SHB45455311515M42x1,536,01 – 41,0PRPRPR
SHB45QC4553116,515Quick change3,0 – 36,03,0 – 25,03,0 – 31,0 
SHB45QC4553116,515Quick change36,01 – 41,0PRPRPR
SHB45/604568PR15M42x1,5PRPRPR 
SHB45/604568PR15M42x1,5PRPRPRPR

HYDROMAT COLLETS CLAMPING SURFACE DESIGNS

 

SAW BURR CUT

  • Improved runout, as sawing burr can be reliably picked up in the clearance area

 

HYDROMAT COLLETS SHAPES

SPECIAL PROFILES

  • Various profiles possible
  • Profiles can be adapted individually to the workpiece

SPECIAL CONTOURS

  • Complex contours can be realized by hard milling, hard turning and grinding
  • Already possible with smallest diameters from 0.2 mm

 

 

 

HYDROMAT COLLETS SLOT DESIGNS

S-SLOT

  • High and constant clamping force
  • Clamping with virtually no clamping marks
  • Alternatively usable for profile material (corner clamping)
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Easy to clean after use

L-SLOT

  • High and constant clamping force
  • Clamping with virtually no clamping marks
  • Alternatively usable for profile material (corner clamping)
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Easy to clean after use
  • Ideal for clamping short clamping surfaces

 

 

 

 

  • High and constant clamping force
  • Clamping with virtually no clamping marks
  • Alternatively usable for profile material (corner clamping)
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Easy to clean after use

Z-SLOT

  • High and constant clamping force
  • Clamping with virtually no clamping marks
  • Alternatively usable for profile material (corner clamping)
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Easy to clean after use

 

 

 

 

 

  • Clamping with virtually no clamping marks
  • Prevents the entry of machining chips, as the collet closes almost completely
  • Recommended for small bore sizes

HYDROMAT COLLETS VERSIONS

  • The quick change version is screwed into the collet sleeve and locks itself automatically

HYDROMAT COLLETS EQUIPMENT

EJECTOR BAR / EJECTOR SLEEVES / STOP HEADS

  • Are part of a module for hydromat collets to eject or stop workpieces

HYDROMAT REDUCING SLEEVES

  • Are inserted in Hydromat collets, this allows to clamp two different diameters with one collet